23
Clinical evaluators
Clinicians participating in the independent evaluation.
- Source
- Dental Advisor clinical evaluation, 2023
- Evaluated scope
- PERFIT Heavy Body + Light Body Fast Set combination
HUGE Dental · PERFIT VPS
Explore the PERFIT family by clinical application, technique, and setting speed—then compare the exact materials available from EBIKO.



These figures apply to the evaluated PERFIT Heavy Body + Light Body Fast Set combination and should not be generalized to every PERFIT material.
23
Clinicians participating in the independent evaluation.
215
Reported uses within the published evaluation.
88%
Rating reported for the evaluated product pairing.
78%
Evaluators who reported they would recommend the tested combination to a colleague.
Each shortcut opens the same auditable product finder with that application selected.
Manufacturer-based finder
Start with the intended application, then choose the technique and a manufacturer-supported set speed. This shopping guide narrows configured products; it does not replace case assessment or the current IFU.
Use the high-viscosity material in the tray and the low-viscosity wash around the preparation for a dual-viscosity technique.
Light Body Normal has the longer listed intraoral time at 3:30.
Select the Normal variants on each product page and verify the current IFU.
Dual-viscosity component
Normal Set
Dual-viscosity component
Normal Set
A paired tray-and-wash workflow using the Fast variants of both listed materials.
Heavy Body Fast is the limiting listed component at 3:00 intraoral.
Select the Fast variants on each product page and verify the current IFU.
Dual-viscosity component
Fast Set
Dual-viscosity component
Fast Set
PERFIT Putty supplies bulk and support while Light Body records margins and surface detail.
Light Body Normal has the longer listed intraoral time at 3:30.
Follow the current IFU for the selected one-step or two-step putty-wash technique.
Putty-wash component
Normal Set
Putty-wash component
Normal Set
A putty-wash pairing using the manufacturer-listed Fast variants.
Both listed Fast components show a 2:30 intraoral time in the supplied product table.
Follow the current IFU for the selected one-step or two-step putty-wash technique.
Putty-wash component
Fast Set
Putty-wash component
Fast Set
One medium-viscosity material supports a one-material, one-step technique.
PERFIT Monophase is listed as Normal Set only.
Confirm technique suitability and follow the current IFU.
Single material
Normal Set
HUGE lists Heavy Body and Light Body for implant impression workflows using a tray-and-wash approach.
Light Body Normal has the longer listed intraoral time at 3:30.
Confirm the implant technique, tray, transfer components, and current IFU before use.
Dual-viscosity component
Normal Set
Dual-viscosity component
Normal Set
The Fast variants create a shorter handling workflow when supported by the selected technique.
Heavy Body Fast is the limiting listed component at 3:00 intraoral.
Confirm the implant technique, tray, transfer components, and current IFU before use.
Dual-viscosity component
Fast Set
Dual-viscosity component
Fast Set
HUGE lists PERFIT Monophase for implant applications using a one-material technique.
PERFIT Monophase is listed as Normal Set only.
Confirm the implant technique, tray, transfer components, and current IFU before use.
Single material
Normal Set
A configured dual-viscosity option using Heavy Body for tray support and Light Body as the wash.
Light Body Normal has the longer listed intraoral time at 3:30.
Confirm the denture impression stage and current IFU before use.
Denture workflow component
Normal Set
Denture workflow component
Normal Set
A configured Fast Set tray-and-wash option for the selected denture workflow.
Heavy Body Fast is the limiting listed component at 3:00 intraoral.
Confirm the denture impression stage and current IFU before use.
Denture workflow component
Fast Set
Denture workflow component
Fast Set
The supplied HUGE workflow progresses from tray adhesive to Heavy Body border molding and Super Light Body for the final impression.
Apply tray adhesive uniformly and allow at least three minutes to dry before loading silicone, then follow each current IFU.
Confirm the Super Light Body Shopify variant label before ordering.
Full-denture component
Normal Set workflow
Full-denture component
Normal Set workflow
Full-denture component
Normal Set workflow
Regular Body Transparent is paired with Light Body where the supplied materials describe a transparent impression technique.
Regular Body Transparent is the limiting listed component at 3:00 intraoral.
This special-use route is not a general tray-and-wash recommendation. Verify the current IFU.
Transparent workflow component
Fast Set
Transparent workflow component
Fast Set
Regular Body Transparent is the dedicated material for transparent matrices and related mock-up or stamp workflows.
The supplied table lists this material as Fast Set only.
Confirm the intended special use and follow the current IFU.
Special-use material
Fast Set
The dedicated A-silicone bite registration material with the longer listed handling window.
Supplied timing: 0:30 working and 1:30 intraoral.
Select the Normal variant on the product page and verify the current IFU.
Bite registration
Normal Set
The dedicated A-silicone bite registration material with the shorter listed handling window.
Supplied timing: 0:12 working and 0:45 intraoral.
Select the Fast variant on the product page and verify the current IFU.
Bite registration
Fast Set
We could not match that combination. View the full collection or contact EBIKO for help.
Shop all PERFIT productsActual products currently carried by EBIKO. Open “Why this?” for the material's role, then use the live product page for price, availability, and variant selection.
HUGE
Putty tray material · one-step or two-step putty-wash
Normal: 1:30 working / 3:00 intraoral. Fast: 1:15 working / 2:30 intraoral. Pair with Light Body for the configured putty-wash routes.
HUGE
Dedicated A-silicone bite-registration material
Normal: 0:30 working / 1:30 intraoral. Fast: 0:12 working / 0:45 intraoral. Choose the handling window supported by the case and current IFU.
HUGE
High-viscosity tray material · crown, bridge, implant, and denture
Normal: 2:00 working / 3:30 intraoral. Fast: 1:30 working / 3:00 intraoral. Provides tray support while the selected wash records detail.
HUGE
Low-viscosity wash · crown, bridge, inlay/onlay, and implant
Normal: 2:15 working / 3:30 intraoral. Fast: 1:30 working / 2:30 intraoral. Used as the detail-recording wash in configured dual-viscosity and putty-wash routes.
HUGE
High-flow wash · HUGE highlights the full-denture workflow
Manufacturer material lists Normal Set at 2:15 working / 3:30 intraoral and describes a Type 3 high-flow wash, especially for full dentures. Confirm the current product variant label.
HUGE
Transparent impressions, matrices, mock-ups, and occlusal stamp workflows
Fast Set only: 1:30 working / 3:00 intraoral. This is a special transparent material, not a general tray material.
HUGE
Adhesion between VPS material and metal or plastic impression trays
Apply a uniform layer and dry for at least three minutes before loading silicone impression material. Follow the current Tray Adhesive IFU.
HUGE
Medium viscosity · one-material, one-step technique
Normal Set only: 2:00 working / 3:30 intraoral. HUGE lists crown/bridge, inlay/onlay, and implant applications.
Clinical education and technical files stay on the same purchasing path. Crawlable summaries explain each file before you open the manufacturer document.
A visual map of restoration and impression workflows for the broader HUGE clinical portfolio.
Product family overview with applications, techniques, setting speeds, and accessories.
The broader HUGE clinical product ecosystem; useful as a secondary reference beyond PERFIT impression materials.
A compact Normal Set and Fast Set timing comparison across the PERFIT silicone family.
Consistency, Shore A, technique, application, working-time, and intraoral-time matrix.
Product pairing and procedural education for the dual-viscosity workflow.
One-material workflow, handling data, and the manufacturer-listed implant application.
Tray preparation and adhesive placement for metal and plastic impression trays.
Current supplied instructions covering intended use, handling, warnings, storage, and disposal for applicable PERFIT materials.
Instructions, precautions, and handling information for the dedicated bite-registration material.
Application, drying time, tray compatibility, warnings, and storage for PERFIT Tray Adhesive.