Description
PERFIT Putty is a putty impression material made by HUGE Dental. It is a hand-mixed VPS, also called PVS or A-silicone, used as the tray material with a wash material. It comes in Normal Set or Fast Set. Each pack holds 400 g of base and 400 g of catalyst, with 2 measuring spoons. EBIKO Dental ships it from Ontario across Canada.
Normal Set and Fast Set
| Option | SKU | Mixing time | Working time | Time in the mouth |
|---|---|---|---|---|
| Normal Set | HG-10 | 0:30 | 1:30 | 3:00 |
| Fast Set | HG-11 | 0:30 | 1:15 | 2:30 |
These are HUGE's figures at room temperature, 23°C and 50% humidity. A warmer room shortens the time and a cooler room lengthens it.
Technical data
- Consistency: Type 0, putty
- Colour: purple
- Shore A hardness after 24 hours: about 67
- Linear dimensional change after 24 hours: under 0.2%
- Recovery from deformation: over 99.5%
- Detail reproduction: 20 µm
- Shelf life: 3 years
What it is used for
- Crown and bridge impressions
- Inlay and onlay impressions
- One-step or two-step impressions with a wash material
Frequently asked questions
What is putty impression material used for?
Putty impression material is the firm tray material in a VPS impression. It is used with a flowing wash material such as PERFIT Light Body.
How do you mix PERFIT Putty?
Use the two spoons to take equal amounts of base and catalyst, close each lid right away, and do not swap the lids or spoons. Then knead with your fingertips for at least 30 seconds until evenly blended.
Can I mix putty with latex gloves on?
No, HUGE says not to knead the putty in rubber or latex gloves. If you have touched them, clean and dry your hands completely first. HUGE suggests polyethylene gloves.
What is the difference between Normal Set and Fast Set putty?
Fast Set gives 1:15 of working time and needs 2:30 in the mouth. Normal Set gives 1:30 of working time and needs 3:00 in the mouth.
How long can I wait between the putty and the wash?
HUGE says the time between the first impression and the final impression should be no longer than 30 minutes, so that the two materials bond well.
How do I disinfect a VPS impression?
Rinse it under running water for 15 seconds, place it in a disinfectant suitable for addition silicone for 10 to 15 minutes, then rinse for another 15 seconds.
Where can I buy putty impression material in Canada?
EBIKO Dental sells PERFIT Putty online and ships from Markham, Ontario across Canada, with prices in Canadian dollars. See the full HUGE PERFIT range.
Related products
PERFIT Putty is a putty impression material made by HUGE Dental. It is a hand-mixed VPS, also called PVS or A-silicone, used as the tray material with a wash material. It comes in Normal Set or Fast Set. Each pack holds 400 g of base and 400 g of catalyst, with 2 measuring spoons. EBIKO Dental ships it from Ontario across Canada.
Normal Set and Fast Set
| Option | SKU | Mixing time | Working time | Time in the mouth |
|---|---|---|---|---|
| Normal Set | HG-10 | 0:30 | 1:30 | 3:00 |
| Fast Set | HG-11 | 0:30 | 1:15 | 2:30 |
These are HUGE's figures at room temperature, 23°C and 50% humidity. A warmer room shortens the time and a cooler room lengthens it.
Technical data
- Consistency: Type 0, putty
- Colour: purple
- Shore A hardness after 24 hours: about 67
- Linear dimensional change after 24 hours: under 0.2%
- Recovery from deformation: over 99.5%
- Detail reproduction: 20 µm
- Shelf life: 3 years
What it is used for
- Crown and bridge impressions
- Inlay and onlay impressions
- One-step or two-step impressions with a wash material
Frequently asked questions
What is putty impression material used for?
Putty impression material is the firm tray material in a VPS impression. It is used with a flowing wash material such as PERFIT Light Body.
How do you mix PERFIT Putty?
Use the two spoons to take equal amounts of base and catalyst, close each lid right away, and do not swap the lids or spoons. Then knead with your fingertips for at least 30 seconds until evenly blended.
Can I mix putty with latex gloves on?
No, HUGE says not to knead the putty in rubber or latex gloves. If you have touched them, clean and dry your hands completely first. HUGE suggests polyethylene gloves.
What is the difference between Normal Set and Fast Set putty?
Fast Set gives 1:15 of working time and needs 2:30 in the mouth. Normal Set gives 1:30 of working time and needs 3:00 in the mouth.
How long can I wait between the putty and the wash?
HUGE says the time between the first impression and the final impression should be no longer than 30 minutes, so that the two materials bond well.
How do I disinfect a VPS impression?
Rinse it under running water for 15 seconds, place it in a disinfectant suitable for addition silicone for 10 to 15 minutes, then rinse for another 15 seconds.
Where can I buy putty impression material in Canada?
EBIKO Dental sells PERFIT Putty online and ships from Markham, Ontario across Canada, with prices in Canadian dollars. See the full HUGE PERFIT range.
Related products
| Selected Variant | Normal |
| Price | $40.00 $42.99 |
| SKU | HG-10 |
| Brand | HUGE |
| Product Type | Impression Materials |
| Weight | 0.998 kg |
| Availability | ● In Stock |
Need a product document? Contact EBIKO with the product name and SKU.