Description
PERFIT Monophase is a monophase impression material made by HUGE Dental. It is a Type 2 regular body VPS, also called medium body PVS or A-silicone. One material is used on the tray and along the temporary crown or implant, so a one-step impression needs only one consistency. It comes in Normal Set, in a pack of two 50 mL cartridges. EBIKO Dental ships it from Ontario across Canada.
Working time and setting time
| Option | SKU | Working time | Time in the mouth |
|---|---|---|---|
| Normal Set | HG-09 | 2:00 | 3:30 |
HUGE gives the working time at room temperature, 23°C and 50% humidity. A higher temperature can shorten it and a lower temperature can lengthen it. The time in the mouth is a minimum.
Technical data
- Consistency: Type 2, regular body (monophase)
- Colour: light yellow
- Shore A hardness after 24 hours: about 60
- Linear dimensional change after 24 hours: under 0.2%
- Recovery from deformation: over 99.5%
- Detail reproduction: 20 µm
- Dimensional stability: up to 28 days
- Shelf life: 3 years
- Pack: two 50 mL cartridges. Mixing tips and the dispensing gun are sold separately.
What it is used for
- Crown and bridge impressions
- Inlay and onlay impressions
- Implant impressions
- The one-step impression technique
Frequently asked questions
What is monophase impression material?
A monophase impression material has one consistency that is used both in the tray and around the teeth, instead of a separate tray material and wash. PERFIT Monophase is a Type 2 VPS that HUGE recommends for the one-step impression technique.
What is the monophase impression technique?
In the one-step technique, HUGE's instructions say to dispense the material on the tray and along the temporary crown or implant, then seat the tray with some pressure so the silicone can overflow. The tray stays in place until the material has fully set.
What is the difference between monophase and heavy body impression material?
Heavy body is a thicker tray material that is paired with a light body wash, while monophase is one consistency used on its own. After 24 hours, PERFIT Monophase reaches about Shore A 60 and PERFIT Heavy Body about Shore A 68.
What is the setting time of PERFIT Monophase?
PERFIT Monophase gives 2:00 of working time and needs 3:30 in the mouth. It comes in Normal Set only.
Is PERFIT Monophase suitable for implant impressions?
Yes, HUGE recommends PERFIT Monophase for implant impressions and shows it for single and for multiple or full-arch implant cases. HUGE says its hardness gives stability to the transfer posts.
How long does a monophase impression stay accurate?
HUGE lists good dimensional stability for up to 28 days, with a linear dimensional change under 0.2% after 24 hours.
How many impressions does one cartridge make?
HUGE estimates that one 50 mL cartridge makes less than one full-arch impression. Each pack holds two cartridges.
Do I need a dispensing gun for monophase cartridges?
Yes, these cartridges load into a dispensing gun, and the material mixes as it passes through a mixing tip. Use a gun and tips made for 50 mL cartridges. EBIKO also sells a Dispensing Gun For Impression and Mixing Tips.
How do I disinfect a VPS impression?
Rinse it under running water for 15 seconds, place it in a disinfectant suitable for addition silicone for 10 to 15 minutes, then rinse for another 15 seconds.
Where can I buy monophase impression material in Canada?
EBIKO Dental sells PERFIT Monophase online and ships from Markham, Ontario across Canada, with prices in Canadian dollars. See the full HUGE PERFIT range.
Related products
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
PERFIT Monophase is a monophase impression material made by HUGE Dental. It is a Type 2 regular body VPS, also called medium body PVS or A-silicone. One material is used on the tray and along the temporary crown or implant, so a one-step impression needs only one consistency. It comes in Normal Set, in a pack of two 50 mL cartridges. EBIKO Dental ships it from Ontario across Canada.
Working time and setting time
| Option | SKU | Working time | Time in the mouth |
|---|---|---|---|
| Normal Set | HG-09 | 2:00 | 3:30 |
HUGE gives the working time at room temperature, 23°C and 50% humidity. A higher temperature can shorten it and a lower temperature can lengthen it. The time in the mouth is a minimum.
Technical data
- Consistency: Type 2, regular body (monophase)
- Colour: light yellow
- Shore A hardness after 24 hours: about 60
- Linear dimensional change after 24 hours: under 0.2%
- Recovery from deformation: over 99.5%
- Detail reproduction: 20 µm
- Dimensional stability: up to 28 days
- Shelf life: 3 years
- Pack: two 50 mL cartridges. Mixing tips and the dispensing gun are sold separately.
What it is used for
- Crown and bridge impressions
- Inlay and onlay impressions
- Implant impressions
- The one-step impression technique
Frequently asked questions
What is monophase impression material?
A monophase impression material has one consistency that is used both in the tray and around the teeth, instead of a separate tray material and wash. PERFIT Monophase is a Type 2 VPS that HUGE recommends for the one-step impression technique.
What is the monophase impression technique?
In the one-step technique, HUGE's instructions say to dispense the material on the tray and along the temporary crown or implant, then seat the tray with some pressure so the silicone can overflow. The tray stays in place until the material has fully set.
What is the difference between monophase and heavy body impression material?
Heavy body is a thicker tray material that is paired with a light body wash, while monophase is one consistency used on its own. After 24 hours, PERFIT Monophase reaches about Shore A 60 and PERFIT Heavy Body about Shore A 68.
What is the setting time of PERFIT Monophase?
PERFIT Monophase gives 2:00 of working time and needs 3:30 in the mouth. It comes in Normal Set only.
Is PERFIT Monophase suitable for implant impressions?
Yes, HUGE recommends PERFIT Monophase for implant impressions and shows it for single and for multiple or full-arch implant cases. HUGE says its hardness gives stability to the transfer posts.
How long does a monophase impression stay accurate?
HUGE lists good dimensional stability for up to 28 days, with a linear dimensional change under 0.2% after 24 hours.
How many impressions does one cartridge make?
HUGE estimates that one 50 mL cartridge makes less than one full-arch impression. Each pack holds two cartridges.
Do I need a dispensing gun for monophase cartridges?
Yes, these cartridges load into a dispensing gun, and the material mixes as it passes through a mixing tip. Use a gun and tips made for 50 mL cartridges. EBIKO also sells a Dispensing Gun For Impression and Mixing Tips.
How do I disinfect a VPS impression?
Rinse it under running water for 15 seconds, place it in a disinfectant suitable for addition silicone for 10 to 15 minutes, then rinse for another 15 seconds.
Where can I buy monophase impression material in Canada?
EBIKO Dental sells PERFIT Monophase online and ships from Markham, Ontario across Canada, with prices in Canadian dollars. See the full HUGE PERFIT range.
Related products
| Selected Variant | Normal |
| Price | $20.00 $24.99 |
| SKU | HG-09 |
| Brand | HUGE |
| Product Type | Impression Materials |
| Weight | 0.222 kg |
| Availability | ● In Stock |
Need a product document? Contact EBIKO with the product name and SKU.
Loading product details...