Description
PERFIT Super Light Body is a super light body impression material made by HUGE Dental. It is a Type 3 VPS wash material, also called PVS or A-silicone, used together with a tray material. HUGE recommends it for full denture impressions. It comes in Normal Set, in a pack of two 50 mL cartridges. EBIKO Dental ships it from Ontario across Canada.
Working time and setting time
| Option | SKU | Working time | Time in the mouth |
|---|---|---|---|
| Normal Set | HG-01 | 2:15 | 3:30 |
HUGE gives the working time at room temperature, 23°C and 50% humidity. A higher temperature can shorten it and a lower temperature can lengthen it. The time in the mouth is a minimum.
Technical data
- Consistency: Type 3, wash material
- Colour: dark green
- Shore A hardness after 24 hours: about 56
- Linear dimensional change after 24 hours: under 0.2%
- Recovery from deformation: over 99.5%
- Detail reproduction: 20 µm
- Shelf life: 3 years
- Pack: two 50 mL cartridges. Mixing tips and the dispensing gun are sold separately.
What it is used for
- Full denture impressions
- The wash in an impression made with a tray material
Frequently asked questions
What is super light body impression material used for?
Super light body impression material is a wash material that is used together with a tray material. HUGE recommends PERFIT Super Light Body for full denture impressions.
What is the difference between light body and super light body?
HUGE lists PERFIT Super Light Body for full denture impressions, while PERFIT Light Body is also listed for crown, bridge, inlay, onlay, implant and orthodontic impressions. Both reach about Shore A 56 after 24 hours. Super Light Body is dark green and comes in Normal Set only. Light Body is orange and also comes in Fast Set.
What tray material goes with super light body?
HUGE shows it with PERFIT Heavy Body: Heavy Body for border moulding in an individual tray, then Super Light Body for the final impression. HUGE's instructions also describe a Type 3 wash over a first impression made with putty, such as PERFIT Putty.
How long does PERFIT Super Light Body take to set?
PERFIT Super Light Body gives 2:15 of working time and needs 3:30 in the mouth. It comes in Normal Set only.
How long can I wait between the first impression and the wash?
HUGE says the time between the first impression and the final impression should be no longer than 30 minutes, so that the two materials bond well.
How many impressions does one cartridge make?
HUGE estimates about 4 full-arch impressions from one 50 mL cartridge. Each pack holds two cartridges.
Do I need a dispensing gun for these cartridges?
Yes, these cartridges load into a dispensing gun, and the material mixes as it passes through a mixing tip. Use a gun and tips made for 50 mL cartridges. EBIKO also sells a Dispensing Gun For Impression and Mixing Tips.
How do I disinfect a VPS impression?
Rinse it under running water for 15 seconds, place it in a disinfectant suitable for addition silicone for 10 to 15 minutes, then rinse for another 15 seconds.
Where can I buy super light body impression material in Canada?
EBIKO Dental sells PERFIT Super Light Body online and ships from Markham, Ontario across Canada, with prices in Canadian dollars. See the full HUGE PERFIT range.
Related products
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
PERFIT Super Light Body is a super light body impression material made by HUGE Dental. It is a Type 3 VPS wash material, also called PVS or A-silicone, used together with a tray material. HUGE recommends it for full denture impressions. It comes in Normal Set, in a pack of two 50 mL cartridges. EBIKO Dental ships it from Ontario across Canada.
Working time and setting time
| Option | SKU | Working time | Time in the mouth |
|---|---|---|---|
| Normal Set | HG-01 | 2:15 | 3:30 |
HUGE gives the working time at room temperature, 23°C and 50% humidity. A higher temperature can shorten it and a lower temperature can lengthen it. The time in the mouth is a minimum.
Technical data
- Consistency: Type 3, wash material
- Colour: dark green
- Shore A hardness after 24 hours: about 56
- Linear dimensional change after 24 hours: under 0.2%
- Recovery from deformation: over 99.5%
- Detail reproduction: 20 µm
- Shelf life: 3 years
- Pack: two 50 mL cartridges. Mixing tips and the dispensing gun are sold separately.
What it is used for
- Full denture impressions
- The wash in an impression made with a tray material
Frequently asked questions
What is super light body impression material used for?
Super light body impression material is a wash material that is used together with a tray material. HUGE recommends PERFIT Super Light Body for full denture impressions.
What is the difference between light body and super light body?
HUGE lists PERFIT Super Light Body for full denture impressions, while PERFIT Light Body is also listed for crown, bridge, inlay, onlay, implant and orthodontic impressions. Both reach about Shore A 56 after 24 hours. Super Light Body is dark green and comes in Normal Set only. Light Body is orange and also comes in Fast Set.
What tray material goes with super light body?
HUGE shows it with PERFIT Heavy Body: Heavy Body for border moulding in an individual tray, then Super Light Body for the final impression. HUGE's instructions also describe a Type 3 wash over a first impression made with putty, such as PERFIT Putty.
How long does PERFIT Super Light Body take to set?
PERFIT Super Light Body gives 2:15 of working time and needs 3:30 in the mouth. It comes in Normal Set only.
How long can I wait between the first impression and the wash?
HUGE says the time between the first impression and the final impression should be no longer than 30 minutes, so that the two materials bond well.
How many impressions does one cartridge make?
HUGE estimates about 4 full-arch impressions from one 50 mL cartridge. Each pack holds two cartridges.
Do I need a dispensing gun for these cartridges?
Yes, these cartridges load into a dispensing gun, and the material mixes as it passes through a mixing tip. Use a gun and tips made for 50 mL cartridges. EBIKO also sells a Dispensing Gun For Impression and Mixing Tips.
How do I disinfect a VPS impression?
Rinse it under running water for 15 seconds, place it in a disinfectant suitable for addition silicone for 10 to 15 minutes, then rinse for another 15 seconds.
Where can I buy super light body impression material in Canada?
EBIKO Dental sells PERFIT Super Light Body online and ships from Markham, Ontario across Canada, with prices in Canadian dollars. See the full HUGE PERFIT range.
Related products
| Selected Variant | Normal Set |
| Price | $20.00 $24.99 |
| SKU | HG-01 |
| Brand | HUGE |
| Product Type | Impression Materials |
| Weight | 0.227 kg |
| Availability | ● In Stock |
Need a product document? Contact EBIKO with the product name and SKU.
Loading product details...