Hard, non-porous surfaces
BioSURF is the hard-surface route, with a manufacturer-stated one-minute contact time. Read the current label for use sites and directions.
MICRYLIUM INFECTION CONTROL · AVAILABLE FROM EBIKO IN CANADA
Compare Micrylium products by operatory surface, instrument reprocessing step, dental equipment system, or device-care task—then confirm the current label, directions, and format before purchase.



Each tab keeps a different infection-control or device-care job separate. Use this page to identify the product family; the current product label, SDS, and manufacturer directions remain the controlling use documents.
Choose the surface-disinfection product by the surface itself. BioSURF and BioTEXT are not presented as interchangeable, and LeCLOTH is a dry wiping substrate rather than a disinfectant.
BioSURF is the hard-surface route, with a manufacturer-stated one-minute contact time. Read the current label for use sites and directions.
BioTEXT is the clinical-surface route Micrylium positions for delicate, textured, or irregular surfaces, with a manufacturer-stated three-minute contact time.
LeCLOTH is a dry, lint-free cotton wiping material that may be saturated with an appropriate cleaner or disinfectant. The cloth itself is not the active disinfectant.
Separate holding and pre-cleaning from detergent cleaning. BioMERS is positioned for instrument holding and aseptic transport; BioSON is the enzymatic detergent or ultrasonic-cleaning step before sterilization.
BioMERS is a ready-to-use immersion cleaner and holding solution for contaminated instruments before the detergent-cleaning and sterilization steps.
BioSON is the four-enzyme universal device detergent and pre-soak route. For dental ultrasonic use, the manufacturer sell sheet states 1:40 and 10 minutes.
Keep evacuation-system maintenance and dental-unit waterline treatment in distinct routes. Use each product's current manufacturer directions for the application-specific procedure and use rate.
BioVAC is a controlled-foam enzymatic detergent for suction lines, evacuation systems, cuspidors, and traps. Follow the application-specific current directions.
LINES is the ready-to-use route for waterline shock and maintenance treatment. It is not presented here as a continuously metered daily-water additive.
Find products for oral-appliance cleaning, anti-fog treatment, and solvent cleaning without confusing them with surface disinfectants.
MouthOFF is an oral-appliance cleanser for items such as mouthguards, orthodontic appliances, snore guards, dentures, and sleep-apnea devices.
RADAR is the anti-fog route for mirrors and instruments. Confirm compatibility and current directions before applying it to a device.
Micrylium Spirits USP is a flammable cleaning and degreasing solvent for hard surfaces. It is not a disinfectant.
THE MAIN SURFACE DECISION
Choose by surface type—not by bottle colour or habit. The manufacturer lists different contact times and Canadian drug identification numbers for the two liquid products.
HARD SURFACE ROUTE
Use BioSURF when the job is disinfection of compatible hard, non-porous environmental surfaces. Confirm the current label's surface compatibility, cleaning step, wet-contact directions, and precautions.
DELICATE & TEXTURED ROUTE
Use BioTEXT when the compatible surface is delicate, textured, or irregular. Keep the surface visibly wet for the current labelled contact time and follow the current directions and precautions.
All 11 products currently listed by EBIKO appear below. The page uses official Micrylium product names and corrected task descriptions while the existing Shopify product titles remain unchanged.
Micrylium
Hard, non-porous environmental-surface disinfectant · 1-minute manufacturer contact time
The main hard-surface route. Confirm surface compatibility, pre-cleaning requirements, contact time, and precautions on the current product label.
Micrylium
Clinical-surface disinfectant for delicate, textured, or irregular compatible surfaces
The main delicate- and textured-surface route. The manufacturer states a three-minute contact time for the liquid product.
Micrylium
Dry, lint-free cotton wiping substrate · not a disinfectant
Use as a wiping substrate with an appropriate compatible cleaner or disinfectant. Follow the selected chemical product's directions and the LeCLOTH care guidance.
Micrylium
Ready-to-use instrument immersion cleaner and holding solution
BioMERS belongs in the contaminated-instrument holding and aseptic-transport route—not the patient mouthrinse route. Continue with detergent cleaning and sterilization according to the clinic's validated process.
Micrylium
Four-enzyme device detergent, pre-soak, and ultrasonic-cleaning concentrate
The manufacturer sell sheet states a 1:40 dilution and 10-minute time for dental ultrasonic use. Follow the current product directions for each application.
Micrylium
Controlled-foam enzymatic detergent for suction and evacuation systems
For suction lines, evacuation equipment, cuspidors, and traps. Application-specific use rates vary, so open the current manufacturer document before use.
Micrylium
Ready-to-use dental-unit waterline shock and maintenance treatment
The manufacturer describes full-strength shock and maintenance procedures that remain in the tubing for an instructed period. Follow the current directions for the unit and schedule.
Micrylium
Cleaner for removable oral appliances and related devices
MouthOFF is positioned for cleaning removable devices such as mouthguards, orthodontic appliances, snore guards, dentures, and sleep-apnea appliances—not as a breath spray.
Micrylium
Anti-fog solution for compatible mirrors and instruments
Use the current directions and confirm device compatibility before applying RADAR to mirrors or instruments.
Micrylium
Flammable solvent blend for wax, resin, oil, and soil removal · not a disinfectant
Keep Spirits in its cleaning and degreasing role. Follow ventilation, flammability, material-compatibility, and other current SDS and label precautions.
Micrylium
Non-clinical practice extra
A non-clinical item kept visually separate from disinfectants, detergents, and equipment-care products.
Crawlable summaries help clinicians and search systems understand each document before opening it. Use the official manufacturer file or Canadian database for the current controlled detail.
A manufacturer overview of the Micrylium infection-control and cleaning family. Use the EBIKO product cards above to confirm the products, formats, pricing, and availability currently offered in Canada.
The manufacturer's current library of sell sheets and safety-data resources. Check the current document revision whenever the label or use procedure is material to the purchasing decision.
Manufacturer summary for the hard-surface disinfectant route, including the stated one-minute contact time, formats, and DIN 02209756.
Manufacturer summary for delicate, textured, and irregular clinical surfaces, including the stated three-minute contact time and DIN 02209640 for the liquid product.
Official Canadian database search for Micrylium products. Database status and marketed-product records should be checked directly rather than inferred from older labels or brochures.
Manufacturer directions and positioning for BioMERS as a ready-to-use instrument immersion cleaner, holding solution, and aseptic-transport step before subsequent cleaning and sterilization.
Manufacturer directions for the four-enzyme device detergent, including the dental ultrasonic 1:40 dilution and ten-minute time stated in the current sell sheet.
Manufacturer application guidance for suction and evacuation systems, cuspidors, and traps. Use the full document because use rates differ by application.
Manufacturer guidance for ready-to-use dental-unit waterline shock and maintenance treatment, including the fill volume and leave-in periods described for the procedure.